Image 1

DT SWISS Road Hubs 240s

×
×
Price:
$385.85
Shipping:
Calculated at checkout
Quantity:
  • Product Description

    This high precision Swiss engineered front hub uses an oversized 17mm axle to provide maximum stiffness. The 107g 240s is the signature DT Swiss hub and is the gold standard for lightweight high-quality hubs.

    The 240s is a sealed cartridge bearing hub, performing well in wet conditions. The contact free flange seals enclose the highest quality corrosion resistant stainless steel bearings, which improves rolling efficiency and durability. At 107g the 240s front hub is a Wheelbuilder favorite for building dependable training and racing wheels.

    Additional information:

    • Weight: 107g ± 5%
    • Available Hole counts: 16, 18, 20, 24, 28, 32
    • Colors: Black and white (White-28H only)
    • Replacement bearings: 2 x 6803
    • DimensionsIdeal use: Road training, road racing, cyclocross
      • Flange Diameter: 39
      • Flange to Center: 37.4

     

     

     

     

    This high-precision Swiss-engineered rear hub uses a 15mm axle to maximize rear wheel stiffness. The 240s is the signature DT Swiss hub and is the gold standard for lightweight high-quality hubs.

    Multi-speed cassettes can create asymmetrical, highly dished wheels. With many hubs, this asymmetry doesn't allow sufficient spoke tension on the non-drive-side of the wheel, leading to poor durability and lateral stiffness. DT Swiss focused on this issue and developed the 240s road hub with optimized flange geometry to improve wheel symmetry.

    DT Swiss' patented Star Ratcheting System offers low maintenance, ultimate strength and quick engagement. The 18-tooth ratchet allows for a more positive pick-up when you hammer down on the cranks. DT Swiss' proprietary coating on the ratchet and axles improves the lifespan of the hub. For riders requiring even faster engagement, Wheelbuilder can install the DT Swiss 36 Step Star Ratchet Upgrade Kit into your 240s hub.

    The 240s is a sealed cartridge bearing hub, performing well in wet conditions. The contact free flange seals enclose the highest quality corrosion resistant stainless steel bearings, which improves rolling efficiency and durability. The 240s rear hub is a Wheelbuilder favorite for building dependable training and racing wheels.

    Campagnolo hubs include a 12/13 lockring

    Now available in white (28-spoke only)!

    Additional information:

    • Weight: 212g +/- 5% Shimano
    • Available hole counts: 20, 24, 28, 32
    • Colors: black and white (28H only)
    • Replacement bearings: 2 x 6902, 2 x 6802
    • DimensionsIdeal use: road training, racing and climbing
      • Left Flange Diameter: 45
      • Right Flange Diameter: 45
      • Shimano Freehub
        • Center to Left Flange: 33.2
        • Center to Right Flange: 17
      • Campagnolo Freehub
        • Center to Left Flange: 33.2
        • Center to Right Flange: 17

     

  • Product Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category

×
×